I’m looking at quad port 2.5Gbe Intel PCIe cards. These cards seem to be mostly x4 physically (usually PCIe gen 3) whilst I have a PCIe Gen4 X1 slot, which is more the theoretical bandwidth that the card can support. The card needs at the most PCIE Gen 3 X2 == PCIE Gen 4 X1 in terms of bandwidth.

How do I fit the card into a PCIe x1 slot? Won’t it lose performance if all the pins are not connected to the physical PCIe connector? Is there a PCIe x1 riser that the community likes that is somewhat affordable?

Thanks

  • Nollij@sopuli.xyzEnglish
    6·
    4 days ago

    They all have to work (at least to an extent) using only x1. It’s part of the PCIe spec.

    Missing pins are actually extremely common. If your board has a slot that’s x16 (electrically x8), which is very common for a second video card, take a closer look. Half the pins in the slot aren’t connected. It has the full slot to make you feel better about it, and it provides some mounting stability, but it’s electrically the same as an x8 that’s open.