Is the NIC built into the motherboard or an add on pcie card?

You could check the journal to see if the logs tell you anything.

You could try taking some packet captures from opnsense and your server while accessing your externally available web server. Reviewing the pcaps might give you some hints on how fix it based on what behaviour you see in the captures.

This is how I would do it also, assuming you aernt passing the NICs through to VMs

deleted by creator

Once you change your DNS server in your router, make sure to renew your clients DHCP lease. It may still be using the stale DNS server. On windows verify its using the new DNS server with: ipconfig /all

LocalSend, a cross platform alternative to airdrop and nearby share.

My family uses it for almost all of our filesharing. IPhone to android, iPhone to windows PC, android to macbook, etc. Its works really, really well.

No issues jumping straight from 37 server edition to 40.

This website has a bunch of great practice “wargames”. You’ll learn a bunch about common linux commands and the different options for them. It also provides you with some great tips on what to google if you get stuck. I reccomend starting with bandit.

https://overthewire.org/

+1 for openscad. I switched over from Fusion 360 back when autodesk changed the personal use license in 2020.

It takes a bit to get used to it, but once you’ve made a few parts you begin to see how powerful it can really be.

Its also super lightweight, so you can run it on most systems without any issues. I’ve ran in on a chromebook before.

The only thing I miss about fusion 360 is an easy way to add fillets to parts, that can be tricky in openscad. I use chamfers for the most part though, so I don’t miss it much.

I do this same thing. I have Ubuntu on an external ssd with its own EFI partition. I followed this guide to get it setup and it works great.

https://itsfoss.com/intsall-ubuntu-on-usb/

A custom router + managed switch is a great way to learn. Studying the fundamentals is also good, but in my opinion it’s not as fun as setting up your own network and learning hands-on.

If you decide to go this route I highly reccomend taking regular backups of your config (and backup again before you change stuff). Part of learning involves breaking things - trust me you will break your network - and in networking that’s one of the best ways to learn. Backups will give you an easy way to restore to a known working configuration.

deleted by creator

Yes. A unifi ap connects all my wireless devices to my LAN

Yes its my main router. Everything comes into the laptop across one interface setup as a trunk that includes vlans for WAN, LAN, etc. From there proxmox has a vlan aware linux bridge setup that connects to all the VMs/containers that I run. The VM virtual interfaces get tagged with whatever network I want the host to be part of.

I have a laptop motherboard setup with proxmox running:

• plex
• radarr,sonarr,prowlarr
• opnsense
• foundry VTT
• pi-hole
• unifi controller
• qbittorrent
• kavita

This is running on an i5-1135 with 40gigs of memory. If your frugal about how you have stuff setup you can pack alot of services into old laptops.

If your VPS can connect to your home router as a client it sounds like your wireguard server on opnsense is working correctly.

Might be a problem with your phones WG config. Have you tried taking the client .conf file from your VPS and loading it onto your phone to test a working config file?

I wish Firefox had native tab grouping. That’s the only thing I miss from chrome.

Yes, looks like that is the official name for it. Thanks.

I really like the web based management panel. Make it really quick and easy to add/change firewall rules, look at logs, etc.

Samsung’s TTS engine for android is the best I have found. I use it to listen to epub books.