Sorry for my ignorance, but how does that work? I (think) I understand what a kernel is, but how am I using Fedora 39 with a 38 kernel? Is there a documentation I can read somewhere so I can understand how that works?

Today it got fixed somehow, I just booted up Fedora 39 and it just worked. Also thanks a lot for the answer!

At the end I just erased all my disks and started all over again :( figured it was the easiest and quickest way to deal with it because I urgently needed W11 for my job, I’ll just be more ready for next time and read more about the OS before making a move so sudden like that

I chose sysremd, I didn’t have time to fix the issue as I needed my laptop for work so I just did a clean install of everything once again. I think I will keep trying Fedora but I will read the documentation of EOS first so I can understand what I’m doing, I can’t afford to make the same mistake again lol. I think what happened is that I accidentally erased the Windows EFI partition somehow and that’s why it was not going in.

Is there an actual difference between those? Is one better than the other or it’s just the OS giving options?

This is what I’m thinking happened. I already said this in another comment but will expand here because this comments refers specifically to the EFI partition. Here’s the weird thing, 3 days ago, I had 2 SSDs:

• 1 with 3 partitions of Windows, one EFI part., one recovery part, and the regular C: local where my files were.
• On my secondary SSD, I had Fedora installed. If I’m correct, I had a /boot, and /home(?) don’t remember if anything else.

I decided to do a clean install of Win11. When I did, I had both SSDs connected to my laptop, and when I finished the installation, this was how it was divided:

• 1st SSD: one, full 2TB C: Local disk, with no partitions.
• 2nd SSD: One EFI partition, one recovery partition, and one “empty” partition.

It was highly confusing, because I thought I had Fedora there, my immediate thought was that Win11 just straight up ravaged both my SSDs and decided “fuck it, let’s install wherever the fuck I want” and it did. HOWEVER I could still get into Fedora and use it normally. Still had all the apps and programs I installed, everything was correct. So I assumed the drive still belonged to Fedora.

When I installed EOS, I chose “Erase Disk” on the secondary SSD (the one with Fedora, the one that had this “EFI partition” that didn’t have before. I think when I erased that SSD, I erased the Windows EFI partition and couldn’t boot as a result. And that’s why the BIOS was not recognizing the OS, but at the same time I could just mount the SSD in EOS and just look t my files normally. So I think that’s what happened, but honestly I’m not even sure of how it happened.

I tried all orders, there were 2 Samsung SSDs (primary and secondary), and another one called “EFI” something… When I changed the order to SSD #1 it opened EndevourOS, when I changed to SSD #2 it said “checking media… failed”, and when I put the “EFI” as the first in the order, it just restarted and went again to EndevourOS. At the end, I had to do the easiest and fastest thing: start over.

I think that when I installed Win11, it took part of my Fedora partition somehow, I’m not even sure if that’s what happened and if that is what actually happened I have no clue how it happened, but right before erasing my secondary SSD to install EOS, there was a mention of a Windows “EFI” partition there, even though I could still get into Fedora. So when I erased that, I think I erased something related to Windows that I shouldn’t have erased

While I was trying to fix the issue all day, this comment is one of the things I tried, but when my laptop started, it just said “checking media… fail”, then getting reset into an endless loop. I said it in other comments but I think I erased an EFI partition that I shouldn’t have, I think Windows took part of my secondary SSD somehow.

After reading all these comments I just decided to format all my drives and start over. I made the mistake of installing EndevourOS at 12am when the next day I had to use Windows for my job! I did enter BIOS and changed the order but not even my BIOS recognized the OS, it just said “checking media… fail” and it fell into a permanent loop. What I said in another comment was that I thought this had happened:

It’s weird, but I had Fedora installed on my secondary SSD. Apparently when I did a clean Windows install, it installed in the primary SSD but took a part of Fedora on the secondary SSD as a Windows EFI partition. Then, when I installed EOS I selected “erase the disk” for the secondary SSD. I think it erased that EFI partition and I couldn’t go back to windows, but since the primary SSD still had my files I could still see them. To be honest, something like that never happened before so I’m not even sure of what I’m saying.

I’m not even sure if that’s what happened, as I’m still not an expert in these things, but when I erased the secondary SSD there was a “EFI partition” I had not seen before.

I wish, I still need to use Adobe products for my job, not even sure if I can install Adobe products in Linux yet, I’m still learning haha!

This is what I think happened that I wrote on another comment:

It’s weird, but I had Fedora installed on my secondary SSD. Apparently when I did a clean Windows install, it installed in the primary SSD but took a part of Fedora on the secondary SSD as a Windows EFI partition. Then, when I installed EOS I selected “erase the disk” for the secondary SSD. I think it erased that EFI partition and I couldn’t go back to windows, but since the primary SSD still had my files I could still see them. To be honest, something like that never happened before so I’m not even sure of what I’m saying.

Tbh I’m not even sure if that’s what happened, I just didn’t find an easy solution apart from starting over.

I was using UEFI I think? I used Rufus to make the bootable flash drive and it just gave me either MBR or GPT, when I selected GPT it showed me the UEFI option to the right (iirc). I spent all day seeing these comments and at the end of the day I had to delete everything in my hard drives and start over again…

It’s weird, but I had Fedora installed on my secondary SSD. Apparently when I did a clean Windows install, it installed in the primary SSD but took a part of Fedora on the secondary SSD as a Windows EFI partition. Then, when I installed EOS I selected “erase the disk” for the secondary SSD. I think it erased that EFI partition and I couldn’t go back to windows, but since the primary SSD still had my files I could still see them. To be honest, something like that never happened before so I’m not even sure of what I’m saying.

That’s the problem not even the bios is reading windows after the EOS installation. I keep changing the order of things but when I boot from the other SSD it just says “checking media” and then “failed” and it gets looped over and over again.

But I can still see the windows drives and partitions from EOS… It’s the weirdest ting that I’ve seen… Would you recommend just doing a clean install of everything in that case?

Yeah, I feel stupid, I’m sorry.

So when I had Windows installed before, Windows was separated into 4 partitions, (not sure why), and then I installed Fedora on Disk1 (secondary SSD), and it looked to me (emphasis in “looked to me”) like it was only one whole partition.

However, after doing a clean W11 install it showed up as a single partition (which I was not used to) and Disk1 separated into 3 partitions, and aside from that, my laptop was no longer giving me the option to boot into either W11 or Fedora, it was just going straight to W11. That’s where my confusion was from and since I already had installed everything I needed I didn’t want to lose the progress.

I went to BIOS and it showed me that the boot menu was F12 (I didn’t know this before) and lo and behold, I am once again able to enter Fedora, it was just me being a noob and not knowing any better. Sorry for wasting everyone’s time! :(

They can obviously track pirated installs.

They use computational predictions and quantum mathematical calculations through a software called trust me bro.

That’s weird, I use Waterfox and I occasionally get to do some kind of “puzzle”, but other times I just need to click the reCaptcha and it will confirm itself (with the green check)

Ironically, when I use Vivaldi, the captcha doesn’t even load, and when it loads, it says it’s wrong regardless of the answer I give it, so I’m always locked and that’s quite literally the only reason I stopped using Vivaldi.

On Edge I need to fill in puzzles ALL THE TIME, that’s also why I stopped using Edge (apart from the bloatware and the uBlock not working there)

I think this is better tbh, I personally don’t like it when piracy forums/sites/whatever piracy related thing goes too mainstream. Maybe it’s gatekeeping, I don’t know, I just don’t want another Z-Library incident.

Either way, they probably aren’t even against piracy, they’re probably just lazy and don’t want to deal with any of the issues they could potentially face down the line.

Edit - grammar

Yep, every driver is up to date. In fact I just did a fresh windows install once again, updated all drivers once again, and the problem still persists.

The games however are stored in a secondary ssd, so the next thing I’m gonna do is install them on the main, and some of them on an external one, just in case it’s a faulty SSD.

If that’s not it then I have no clue.

Yeah I’m about to give up with these games as well and just not play them, I just finished a clean Windows install again and it still didn’t work, I feel like I’m going insane here haha

I’ll definitely try that tomorrow when I wake up, I just did a fresh install of Windows 11 and it still won’t work, thanks for that recommendation, I have an external ssd so maybe it’ll work like that.

Definitely something wrong with my OS and I’m currently making yet another clean install, because the weird thing is that I’ve played all these games before (except BG3) on the same laptop, I was just replaying them for fun.

I just wanted to see if there was someone else with the same issues or something similar.

Specs are fine

AMD Ryzen 7 5800H, RTX 3050Ti, and 32GB RAM, it’s a Legion 5 (2021)

All games mentioned run 100fps+ on High and I was watching the graphs, temperatures of 60-80C on the CPU and 50-75C on the GPU so those were fine (at least for a laptop)

What you’re saying makes a lot of sense, but, the weird thing is that, except for Baldur’s Gate 3, I already played all these games in my laptop before. I was just replaying them for fun, I just didn’t know if somebody else had the same issues.

I think I’ll just make another clean install and see what happens, this situation has me so confused tbh haha