Hello,

I have been owning an APC Back-UPS BX1600MI for a little under two years and have been encountering issues with it recently: the battery failed in August, I had to RMA and the replacement one is stuck on battery power while plugged to the mains since last night.

From what I gathered online, this model is plagued with issues, so I’m looking for another one.

My requirements are:

  • Purchasable in the EU
  • Has a variant with FR or DE plugs
  • Can be monitored with NUT over USB or Ethernet
  • At least 900VA capacity but if I can get the same capacity as currently (1600VA) for about 200€ I would

Thanks a lot!

EDIT: The UPS is fine, it turns out my street’s transformer had an issue and only provided 135V instead of the expected 230V, which means that the UPS was on battery for a valid reason. What lead me to believe that the UPS was at fault was that every other appliances seemed to work fine.

  • IsoKiero@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    1
    ·
    3 months ago

    I have older 1500VA FSP UPS, I don’t think that exact model is available anymore, but it’s been solid for several years. It currently has 3rd or 4th set of batteries and they are standard bulk batteries, so replacements are easy to find from anywhere. Only problem I’ve had with that is that on display it doesn’t give out clear warnings when batteries degrade and it has crashed my system few times in a power outage, but I’ve been lazy and didn’t bother to properly monitor it nor have scheduled battery replacements, so that’s mostly on me.

    Eaton seems to be pretty solid too, but I don’t have a ton of experience on any of their models. Local suppliers had dirt cheap PowerWalker UPS’s a few years ago, but one of them didn’t survive when battery died, so maybe I got what I paid for. Those worked fine too, but apparently they cooked the carging circuit when battery degraded.

    This is of course just my own experience over a few models, but personally I wouldn’t spend my money on APC. Propietary batteries and multiple failures after battery replacement at work few years back were enough to choose something else.

    • socphoenix@midwest.social
      link
      fedilink
      English
      arrow-up
      1
      ·
      3 months ago

      My apc unit has a standard battery that has a replacement from Duracell, which model(s) have proprietary batteries?

      • IsoKiero@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        2
        ·
        3 months ago

        My experiences are few years old, so I don’t remember excact models anymore, but some back-ups models (es series rings a bell, but as I said, it’s been a while) had batteries with soldered connectors and form-factor which (at least at the time) wasn’t available from anyone else than APC.

        • socphoenix@midwest.social
          link
          fedilink
          English
          arrow-up
          1
          ·
          3 months ago

          Mines at least that as well, it’s good to know come next ups purchase as I would hate to get stuck with that kind of garbage. I’ll have to pay close attention to the battery now when searching

        • roofuskit@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          1
          ·
          3 months ago

          The only proprietary battery thing I’ve come across using APC for decades was a connector that combined two standard batteries. It was attached to them and bound them together with stickers and connected to the terminals of each with normal terminal connectors. I just bought 2 standard replacement batteries and put the adapter on them. It all fit right back in and ran like new.